Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC, Руководство пользователя

Страница: 24 / 390

24 English
Emptying the waste container
1
Transport rolls
2
Waste container
3
Waste container lock
1. Clean the dust filter with the manual filter cleaner.
2. Open the lock on the waste container.
3. Pull out the waste container.
4. Empty the waste container.
When emptying the waste container, make sure that the seal-
ing strip does not become damaged.
5. Raise the waste container at the front and push it in all the way.
6. Check whether the waste container has clicked into place.
Stopping and parking the device
1. Take your foot from the accelerator.
2. Raise the roller brush and side brush.
3. Remove the ignition key.
4. Charge the battery.
5. Empty the waste container.
6. Only park the device on an even surface (< 2% gradient).
Transport
몇
CAUTION
Risk of injury and damage
Be aware of the weight of the device during transportation.
1. The device has 4 marked lashing points. They are for use
when fastening the device.
2. When transporting the device on vehicles, secure it to prevent
it from slipping or overturning in accordance with the respec-
tive valid guidelines.
Storage
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
● This device may only be stored indoors.
● Before prolonged storage:
1. Bring the battery pack to a state of charge between 30% and
50%.
2. Disconnect the charger from the battery connector.
Note
To activate the sleep mode, the battery pack must not be con-
nected to either the charger or the device.
3. Press the button on the battery pack for at least 20 seconds to
put the battery into sleep mode.
The LEDs of the charge indicator all light up and go out one
after the other. The charge indicator will now no longer react
when the button is pressed briefly.
Note
For devices with multiple batteries, this procedure only needs to
be carried out on one battery. The other batteries take over the
sleep mode automatically.
Care and maintenance
General notes
 DANGER
Risk of accidents and injuries due to unintentional move-
ment of the device
Switch off the device before carrying out any care and mainte-
nance work, and remove the ignition key.
Disconnect the central battery plug connector.
Note
● Adhere to the safety instructions for care and maintenance.
Cleaning the device
몇
CAUTION
Risk of short circuits due to water stream
Do not clean the device with a hose or high-pressure water jet.
 DANGER
Health risk from dust
Wear a dust mask and safety goggles when cleaning with com-
pressed air.
ATTENTION
Risk of damage to the surfaces
Do not use any scouring agents or aggressive cleaning agents for
cleaning purposes.
1. Blow out the inside of the device with compressed air.
2. Clean the inside and outside of the device with a damp cloth,
soaked in mild washing lye.
Maintenance intervals
Service hours counter / operating hours / battery charge
ATTENTION
Observe the displays on the display screen when switching on
the device.
1
Display of next service time for customer service
2
Battery charge display
E - Empty
F - Full
3
Operating hours display
Maintenance by the customer
Note
All servicing and maintenance work must be performed by a qual-
ified specialist. If necessary, you can consult a Kärcher specialist
dealer at any time.
● Daily maintenance
1 Check the roller brush and side brush for any tangled pieces
of tape.
2 Check the tyre pressure.
3 Check that the operative elements are fully functional.
4 Clean the dust filter.
● Weekly maintenance
1 Check the moving parts to make sure that they move smooth-
ly.