background image

PRECAUTIONS WHILE USING

Precautions While Using the System 

The following points of precautions needs to be considered 
For safe use of the Fixed Line Systems 

è

The life line is for the purpose of fall protection while working at height. A back up fall arrest 
system is required when transitioning on and off the life line system .

è

Never disengage the fall arresting lanyard from the life line while working at height.

è

Avoid using grease to lubricate the system. If any fall is reported put the system out of use. 
Contact the manufacturer for repairs and re-validation.

è

Only certified KARAM full body harness with proper attachment anchorage points should be 
worn while using KARAM Fixed Line Systems.

è

Do not alter or misuse this equipment. Always take an advice from KARAM personnel while 
using  this  equipment  in  combination  with  components  or  subsystems  other  than  those 
described in this manual. Usage of certain component/sub system may interfere with the 
proper functioning of this equipment and the system may not deliver the working as per its 
intended use. In such case KARAM may not be held responsible for any malfunction.

è

The lifelines must be kept free from dust, grease etc., by periodic cleaning. The system can be 
cleaned by a soft dry cloth.

Hazards

Hazards existing in immediate environment may require additional precautions to limit the possibility 
of injury to the user or damage to the equipment. Hazards may include but are not limited to, extreme 
temperatures, caustic chemicals, corrosive environments, high voltage power lines, explosive or 
toxic gases, moving machinery, sharp edges, high velocity winds Etc. Do not expose the equipment 
to any hazard which it is not designed to withstand. Consult the manufacturer if in doubt.

Rescue Plan

It is mandatory to ensure that the user shall have a rescue plan and means to execute it while using 
this equipment. The rescue plan needs to be project specific. The employees must be trained in self-
rescue or alternative means shall be provided for prompt rescue in an event of a fall.

Always work in a pair to ensure that in an event of a fall your partner may help in rescue.

34

ANNUAL INSPECTION KARE

Fall  Protection  Equipment  is  a  life  saving  product.  As  per  the  EN  365  of  PPE 
Directives89/686/EEC,  It  is  mandatory  to  have  a  ‘Competent  Authority’  to  inspect  the  Fall 
Protection Equipment at least once annually.

KARAM Kare Inspection software takes care of the equipment for at least 20 years.

è

Cloud Based Online as well as off line software.

è

Captures Geo Coordinates where the system is installed.

è

RFID / Bar code compliant.

è

Generates Report in real time.

è

Reminds user of items due for inspection.

è

Captures images of components.

è

user customizable.

è

Can be integrated to client software.

è

Reports can be shared with multiple recipients in real time.

Inspection and Revalidation

Kare

35

Содержание Vertex PN 7000























Отзывы: