Operation of the application
17
2.2. Server protection deployment
In order to create the system of mail servers protection against mali-
cious programs and SPAM using Kaspersky Security 5.5 for Microsoft
Exchange Server 2003:
1. Install
the
Security Server
component
on all protected Exchange
servers. The installation shall be performed from the distribution kit
individually for each server.
2. Install the
Management Console
on a computer within the
corporate network. The Management Console provides a centralized
access to all network resources from a single administrator's
workstation; therefore, it can be installed on one computer only.
However, if several administrators are working together, the
Management Console can be installed to each administrator's
computer.
If the Management Console is not installed, the applica-
tion will function within the default limitations and using
the default settings (see section 4.6, page 33).
The server protection against malicious programs and
SPAM will be enabled automatically when Microsoft Ex-
change Server is started.
3. Create the list of managed servers (see section 4.3, page 30)
4. Connect the Management Console to the servers (see section 4.4,
page 31).
5. Configure the protection system for each server:
•
Configure the anti-virus database and content filtration
database updating settings (details see Chapter 5, page 38).
•
Verify the correctness of the settings and of the application's
operation
o
using a test "virus"
EICAR
(see section 4.7.1, page 35).
o
using a test message that contains spam attributes (see
section 4.7.2, page 36).
•
Configure the notification system that issues notifications about
events registered during the application's operation (see
Chapter 10, page 86)
•
Configure the event logs and reports (Chapter 12, page 100,
Chapter 13, page 111).