Generating and viewing logs, receiving notifications
61
To facilitate viewing and searching the information, the program offers the
opportunity to set up user filters. The filters allow searching and discarding of
currently unnecessary information when it complicates viewing. After the filter is
applied, only that information that meets the requirements of the filter is
displayed. This has great importance since the log stores large volumes of
information.
To set up the filter for the information displayed in the table, do the fol-
lowing:
1. Check the boxes corresponding to the information to be displayed
in the table:
•
Update results
– information regarding the results of the server
anti-virus database update download (this box is checked by
default).
•
Updating source
– information regarding the results of connec-
tion to the update source.
•
Back up before updating
– whether the backup copy of the
previous version of the anti-virus database was created before
updating.
•
Unchanged files
– information regarding the anti-virus data-
base files that were not modified.
•
Files successfully downloaded
– information regarding suc-
cessfully updated anti-virus database.
•
Deleted files
– information regarding the deleted files.
•
Errors
– information about errors in the event that the update
fails.
You can check all the boxes using the
Select all
button, or uncheck
all the boxes using the
Clear
button.
2. In order to refresh the information in the table click on the
Apply
button.
Using the
Parameters
hyperlink you can view the task settings that were to be
used during this session. This will open the task settings window (see Figure 28),
which displays the following information:
•
To
– a list of servers on which anti-virus database must be updated as a
result of executing the task.
•
Backup before updating
– status of the backup mode set for the anti-
virus database prior to updating.
