CHAPTER 3. INSTALLING,
UPDATING, AND
UNINSTALLING THE
APPLICATION
Prior to installing Kaspersky Anti-Virus 5.5 for Novell NetWare please make sure
that hardware and software of the server/workstation meets the program’s
requirements. The minimal possible requirements are specified in section 1.2 on
page 7.
3.1. Installation from the distribution
package
Kaspersky Anti-Virus 5.5 for Novell NetWare is installed from a computer running
Windows 9x/NT/2000/Me/XP.
To install Kaspersky Anti-Virus 5.5 for Novell NetWare, run the installer
(
setup.exe
) from the CD with the application distribution package.
This will start the installation wizard. Follow its directions. Most of the
settings required for installation will be made by default or will be based
on the choice you make. Please read carefully the text in each window of
the wizard. Make any desired changes if necessary.
A detailed description of the installation steps is provided below.
1. First of all, the license agreement will be displayed. You must
accept it in order to proceed with the installation.
2. After that you should select the application components to install
(see Figure 1). You can install both the server-side application and
the client application simultaneously (full installation) or install the
Snapin for ConsoleOne first and then deploy the application via
Novell ConsoleOne. To install the server-side application select
Kaspersky Anti-Virus (version 5.5)
; for the client application select
Snapin for ConsoleOne
and/or
the Web management module.