Scanning the server for viruses
49
Figure 22. Setting up the
Real-Time Protection
task.
The
Scan options
tab
You can take the following actions:
•
Specify regions for scanning, file types to be scanned, regions to be
excluded from scanning, and activate advanced scanning modes, namely:
scan by wildcard, archive scanning, packed executables scanning and
use of heuristic code analyzer. This can be done on the
Scan options
tab
(see Figure 22) (for more details please refer to section B.2.1 below on
page 102).
•
Specify actions to be applied to infected or suspicious files if these
detected, as well as actions to be applied to a workstation that attempts to
store an infected object on the server. This can be done on the
Actions
tab (for more details please refer to section B.2.2 below on page 106).
•
Specify the location of the log file that will contain detailed information
about the results of the task execution, set the log file size and specify the
events to be logged. This can be done on the
Event log
tab (for more
details please refer to section B.2.3 on page 109).
