CHAPTER 4. SETTING UP THE
APPLICATION
4.1. Starting the application
The application is launched, set up, and controlled using Novell ConsoleOne or
the web interface.
To start the application from ConsoleOne
Run this utility on your computer.
To launch the application from the web interface:
1. Open your web browser.
2. In the address bar, enter the following address:
http://Server IP address:port/iKAV
where:
Server IP address is the address of the server on which the
Web
management module
is installed;
port is the port on the server on which the module is installed (de-
fault port is 8080).
Attention! Commands in tomcat version 4 are case sensitive.
3. On the authorization page that opens, enter the required data.
4.2. Application interface
Hereinafter, all instructions and explanations are based on the interface
of Snapin for ConsoleOne. All differences between the Snapin for
ConsoleOne and Web module will be discussed separately.
