KAPERSKY ADMINISTRATION KIT 6.0, Справочник

Страница: 57 / 229

Managing the logical network
57
The Administration Server change task will not be created and
executed for the client computer which hosts Administration
Server.
6. Specify the profile under which the task will be run (see section
3.2.1 on page 112).
7. During the final step create the schedule for running this task (see
Section 3.2.1 on page 111 for details).
2.7.4. Manually connecting the client
computer to the Administration
Server. The
klmover.exe
utility
To manually connect a client computer to the Administration Server:
using the command line on the client computer, start the klmover.exe
utility included in the Network Agent installation.
After the installation of Network Agent, this utility is located in the component’s
root installation folder, and when run from the command line can perform the
following actions, depending on the command line parameters used:
•
connects the Network Agent to the Administration Server using the pa-
rameters supplied;
•
logs the results of the operation in the events log file, or displays them on
the screen.
Utility command line syntax:
•
klmover [-logfile <filename>]
1
[-address <server address>] [-
pn <port number>] [-ps < SSL port number>] [-nossl] [-cert
<path to the certificate file>] [-silent] [-dupfix]
The command line parameters are as follows:
• -logfile <filename>
– record the results of the program’s operation in
the log file. By default the information will be stored in the file stdout.tx. If
the modifier is not used, the results and error messages will be printed to
the screen.
1
{Entries in square bracket are optional modifiers.}