background image

iii

KANTECH WARRANTY TERMS

For KANTECH Products Provided With or Without Components or Software

KANTECH Products purchased with or without Components and Software is copyrighted and is purchased under the following limited
warranty terms:

Sensomatic Electronics, LLC (“Kantech”) warrants the original purchaser that for a period of 5 years from the date of purchase, the product shall
be free of defects in materials and workmanship under normal use. During the warranty period, Kantech shall, at its option, repair or replace any
defective product upon return of the product to its factory, at no charge for labour and materials. Any replacement and/or repaired parts are war-
ranted for the remainder of the original warranty period or ninety (90) days, whichever is longer. The original purchaser must promptly notify Kan-
tech in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expiration of the warranty
period. There is absolutely no warranty on software, and all software products are sold as a user license under the terms of the software license
agreement included with the product. The Customer assumes all responsibility for the proper selection, installation, operation and maintenance of
any products purchased from KANTECH. Custom products are only warranted to the extent that they do not function upon delivery. In such cases,
KANTECH can replace or credit at its option.

International Warranty

The warranty for international customers is the same as for any customer within Canada and the United States, with the exception that Kantech
shall not be responsible for any customs fees, taxes, or VAT that may be due.

Warranty Procedure

To obtain service under this warranty, please return the item(s) in question to the point of purchase. All authorized distributors and dealers have a
warranty program. Anyone returning goods to Kantech must first obtain an authorization number. Kantech will not accept any shipment whatso-
ever for which prior authorization has not been obtained.

Conditions to Void Warranty

This warranty applies only to defects in parts and workmanship relating to normal use. It does not cover any of the following, the occurrence of
which will void this warranty:

damage incurred in shipping or handling;

damage caused by disaster such as fire, flood, wind, earthquake or lightning;

damage due to causes beyond the control of Kantech, such as excessive voltage, mechanical shock or water damage;

damage caused by unauthorized attachment, alterations, modifications or foreign objects;

damage caused by peripherals (unless such peripherals were supplied by Kantech.);

defects caused by failure to provide a suitable installation environment for the products;

damage caused by use of the products for purposes other than those for which it was designed;

damage from improper maintenance; and

damage arising out of any other abuse, mishandling or improper application of the products.

Items Not Covered by Warranty

In addition to the items which void the Warranty, the following items shall not be covered by Warranty: (i) freight cost to the repair centre; (ii) prod-
ucts which are not identified with KANTECH's product label and lot number or serial number; (iii) products disassembled or repaired in such a
manner as to adversely affect performance or prevent adequate inspection or testing to verify any warranty claim. Access cards or tags returned
for replacement under warranty will be credited or replaced at KANTECH's option. Products not covered by this warranty, or otherwise out of war-
ranty due to age, misuse, or damage shall be evaluated, and a repair estimate shall be provided. No repair work will be performed until a valid
purchase order is received from the Customer and a Return Merchandise Authorization number (RMA) is issued by KANTECH’s Customer Serv-
ice. Kantech’s liability for failure to repair the product under this warranty after a reasonable number of attempts will be limited to a replacement of
the product, as the exclusive remedy for breach of warranty. Under no circumstances shall Kantech be liable for any special, incidental, or conse-
quential damages based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory. Such damages include,

Содержание Door Controller Innovative and Powerful KT-300





























Отзывы: