Kantech Door Controller Innovative and Powerful KT-300 Скачать руководство пользователя страница 23

Страница: 23 / 28

DN1315-1007

KT-300 Door Controller Installation Manual

Applying Power

1. After all wiring is completed, apply power to the KT-300.

2. Connect the battery leads to the battery.

3. Then, connect the AC transformer.

NOTE:

Do not connect the power until all wiring is completed.

Assigning the KT-PC4216 Module

Follow the Instructions below for assigning and programming your KT-PC4216 module.

1. Establish communication between EntraPass and the controller.

2. Remove the tamper switch wire (or only the wire if tamper switch is not used).

3. A serial number, the type of module and on which controller it is connected should be displayed on the screen.

4. From the EntraPass user interface, go to the controller definition window and select the functionality of the

module and enter the serial number in the appropriate field (refer to

Chapter 4, Defining Devices

of your

EntraPass Reference Manuel

for more details).

NOTE:

Do not forget to reconnect the tamper switch (or the wire, if there is no tamper switch).

NOTE:

If you are using a KT-PC4204 in “repower” mode on the same loop, do not use the first relay of the KT-PC4216.

KT3-LCD - Kantech LCD Time & Date Display Module

KT3-LCD Introduction

The KT3-LCD module is an LCD readout module with integrated keypad
which provides date and time via a 32-character liquid crystal display.

KT3-LCD Specifications

•

Connects to control panel via 4-wire Combus

•

Current draw: 50 mA (from Combus)

•

Input status (green), AC Fail (red) and Trouble (yellow) status
lights

Unpacking the KT3-LCD

The KT3-LCD package includes the following parts/items:

•

One KT3-LCD keypad

•

Four mounting screws

Mounting the KT3-LCD

The keypad should be mounted where it is accessible to designated points to entry/exit. Once a dry and secure location is
selected, perform the following steps to mount the keypad:

1. Remove the keypad back plate by loosening the screw located at the base of the unit.

2. Secure the keypad back plate to the wall in the desired location. Use the included screws.

NOTE:

Power is drawn from
the Combus. May
require a KT-PC4204
power supply module
if drawing too much
power from the
Combus.

Содержание Door Controller Innovative and Powerful KT-300





























Результаты поиска

Содержание Door Controller Innovative and Powerful KT-300

Отзывы:

Похожие инструкции для Door Controller Innovative and Powerful KT-300

Бренды по названию

Популярные бренды

Kantech Door Controller Innovative and Powerful KT-300, Руководство по установке

Результаты поиска

Содержание Door Controller Innovative and Powerful KT-300

Отзывы:

Похожие инструкции для Door Controller Innovative and Powerful KT-300

Бренды по названию

Популярные бренды