KanexPro EXT-PROCTRL, Руководство пользователя

Страница: 37 / 57

37
Note: Selecting this will automatically change the Analog Audio Source type to “HDMI Audio
(Stereo Downmix)”. This setting overrides any manual routing selections made from the Analog
Audio routing tab.
- Follow Tx Analog Audio:
The analog audio output will automatically use the analog
input on the currently routed HDMI video’s transmitter.
Note: This setting overrides any manual routing selections made from the Analog Audio routing tab.
6.6.6 Scaling Tab
This tab provides drag-and-drop control over the video output resolution of each receiver in
the system.
Note: Due to this scaling occurring only on the receiver side, changes to resolutions here has no impact
on bandwidth usage.
1. Resolution Selection:
To select an output resolution for a receiver, click and drag the
receiver or receiver group’s button on the left to the preferred resolution on the right
side, then release the mouse button. If the selection was completed successfully, the new
resolution will be displayed below each affected receiver’s name. To change all receivers
to the same resolution, drag the “Rx All” button to the preferred resolution on the right
side. Selecting “Bypass” will force that receiver to output all routed sources in their native
resolutions.
Note: Resolutions may also be drag and dropped onto receivers to change the output resolution.