KanexPro EXT-PROCTRL, Руководство пользователя

Страница: 31 / 57

31
Time: Enter the time to execute the macro on all selected days. Clicking on the time
field will open the “Choose Time” window to make setting a time easier.
• Save Schedule: Click this button to save changes to the current schedule.
6.6.4 Transmitter Tab
This tab shows all transmitters that have been detected by the unit. Details about each
transmitter’s name, IP address, and video content, as well as options to configure the
network, RS-232, USB, and general device settings are also provided.
Note: Units that were previously a part of the system, but are not currently detected will still be
displayed, however they will have a disconnected icon ( ) and cannot be used for routing. These
units may be removed from the list using the “Remove” button.
1. Transmitter Configuration:
• Remove:
Click on this button to remove any transmitter from the list that has the
disconnected icon ( ). The pop-up window provides a dropdown to select the unit
to be removed. Once the selection has been made, click on “Confirm” to apply the
change.
Note: Only disconnected transmitters can be removed.
• Hello:
Clicking on this switch will cause the selected unit to immediately begin
flashing the power LED on the front of the unit to make it easy to find. Clicking it a
second time returns the LED to its normal behavior.
Note: The “Hello” function is not supported by all SDVoE units. Units that support this function will
have the switch highlighted.