K&M FSD4000, Руководство по эксплуатации

Страница: 23 / 48

22 23
EN
Juice Dispenser FSD4000 © K. & M. Holland GmbH © K. & M. Holland GmbH Juice Dispenser FSD4000
EN
Subject to technical change without prior notice! Version 2.0, 11/2017 Subject to technical change without prior notice! Version 2.0, 11/2017
6. Initial start-up
IMPORTANT
This juice dispenser is exclusively designed for the indoor operation/use and must
not be operated outdoors.
1 Prior to the initial start-up, the inside of the dispenser must be cleaned using a damp cloth
and subsequently dried.
2 Connect the mains power plug of the juice dispenser to a properly installed and earthed
wall socket. The mains voltage must be compatible with the information provided on the
type plate.
3
Press the Main switch at the backside of the dispenser. The juice dispenser refrigerates un-
til the water temperature (+5 °C) is reached.
4
Open the door and press the green Standby-Button
5
Ensure the openings for the supply and exhaust air are not obstructed in order to guaran-
tee a smooth function of the juice dispenser.
6.1 Inserting and connecting the Bag-In-Box
CAUTION
Prior to inserting the Bag-In-Box, check its expiry date and inspect the packaging.
1
Place the Bag-In-Box package onto an appropriate work area and open the carton on the
perforated side.
2
Flip back in the tab and pull off the round piece.
3
Pull out the mixing spout and hose until the neck of the cap of the bag is fully exposed.
4
By pushing the tab down, the cap is secured in its position.
5
Open the dispenser’s door and place the Bag-In-Box pack inside.
6
Push the drain hose through the concentrate solenoid valve.