28
29
EN
Juice Dispenser FSD3000 / FSD3100
© K. & M. Holland GmbH
© K. & M. Holland GmbH
Juice Dispenser FSD3000 / FSD3100
EN
Subject to technical change without prior notice! Version 4.0, 12/2017
Subject to technical change without prior notice! Version 4.0, 12/2017
8.2 Digital thermostat LAE LTR-5
Displays
During normal operation, the display indicates the measured temperature or one of the fol-
lowing variables:
OFF
Controller shutdown
OR
Sensor T1 defective
TUN
Auto tuning; restarting in the default temperature
E1
Error during the cooling process; defective sensor
E2
Error, the cooling process was not completed within the maximum specified time.
E3
Temperature too high/too low
Display and change of the set point - default temperature
1
Press
at least half a second
ð
default temperature will be displayed.
2
Keep pressed
and use
or
to adjust the temperature value.
The adjustment can only take place within the minimum value SPL and the maximum va-
lue SPH.
3
When releasing the key
the new value will be stored.
Stand-by
1
Press and keep pressed
for at least 3 seconds
ð
the controller switches to vari-
ous operating modes or standby.
