Nesis III — Installation Manual
11.3
Flap Settings
Tiny
defines a tiny version of parameter name. It must remain tiny, one or
two letter max. It is used where short name does not fit.
Color bands define the parameter scale color marking limits. Illustration of
the parameter limits is given in the right part of the window.
Scale start
defines the starting value (low limit) of the scale.
Color until
defines the color (red, green, yellow) used from previous limit
until the given value. Note that limiting value must be always larger
than the previous one.
Add
adds a new color band at the end.
The
Color until
items are added until full scale range is defined. A
Color
until
item can be also removed or inserted.
A valid parameter requires at least two
Color until
items. If only one is given,
Nesis will not draw the scale properly or will not draw it at all.
11.3
Flap Settings
Flaps may have several fixed positions between fully retracted and fully ex-
tended. This window is used to define visual flap stops markings, which are
relative to the full flap travel. Typically, flap stop 0 corresponds to 0% of
travel and full flaps to 100%. Nesis allows setting up to five different position.
Figure 53 shows an example.
Figure 53:
Example of flap stops window for an airplane with three flap posi-
tions.
57
©
Kanardia
2018
