Kamstrup ULTRAFLOW 34 DN15-125 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 86

Kamstrup ULTRAFLOW 34 DN15-125 Скачать руководство пользователя страница 50

ULTRAFLOW® 54/34

50

Kamstrup A/S · Technical description · 5512-2464_A1_GB_08.2019

230 VAC

This PCB module is galvanically separated from the mains supply and is
suitable for direct 230 V mains installation. The module includes a double-
chamber safety transformer, which fulfils double insulation requirements
when the cover is mounted on Pulse Transmitter/Pulse Divider. Power
consumption is less than 1 W or 1 VA.

National regulations for electric installations must be observed. The 230
VAC module can be connected/disconnected by the district heating

station’s personnel, whereas the fixed 230 V installation in the meter

panel must be carried out by an authorized electrician.

Figure 36. 230 VAC supply module for
Pulse Transmitter/Pulse Divider.

24 VAC

This PCB module is galvanically separated from the 24 VAC mains supply
and is both suitable for industrial installations with joint 24 VAC supply and
individual installations, which are supplied by a separate 230/24 V safety
transformer in the main electrical panel. The module includes a double-
chamber safety transformer, which fulfils double insulation requirements
when the cover is mounted on Pulse Transmitter/Pulse Divider. Power
consumption is less than 1 W or 1 VA.

National regulations for electric installations must be observed. The 24
VAC module can be connected/disconnected by the district heating

station’s personnel, whereas the fixed 230/24 V installation in the main

electrical panel must be carried out by an authorized electrician.

Note: This module cannot be supplied by 24 VDC (direct current).

Figure 37

.

24 VAC supply module for

Pulse Transmitter/Pulse Divider.

230/24 VAC safety transformer

The 24 VAC module is especially suited for installation together with a
230/24 VAC safety transformer, e.g. type 6699-403, which can be installed
in the main electrical panel before the safety relay. When the transformer
is used, the total power consumption of the meter incl. the 230/24 VAC
transformer will not exceed 1.7 W.

Figure 38. 230/24 VAC safety

transformer.

«
...
48
49
50
51
52
...
»

Содержание ULTRAFLOW 34 DN15-125























































































Отзывы:

Нет отзывов