Kamstrup ULTRAFLOW 34 DN15-125 Скачать руководство пользователя | Manualshive

Страница: 14 / 86

background image

ULTRAFLOW® 54/34

14

Kamstrup A/S · Technical description · 5512-2464_A1_GB_08.2019

4.4

Pulse Transmitter / Pulse Divider and Cable Extender Box

4.4.1

Introduction

Depending on the application of ULTRAFLOW®, galvanic separation, adaptation of meter factor to a foreign calculator or
a longer cable between ULTRAFLOW® and MULTICAL® can become necessary. Pulse Transmitter, Pulse Divider and Cable
Extender Box are electronic equipment that are installed between ULTRAFLOW® and the calculator and provide various
technical solutions for these purposes.

Pulse Transmitter and Pulse Divider are available with built-in supply for ULTRAFLOW®. By default, Pulse
Transmitter/Pulse Divider is supplied by a built-in battery. Alternatively, Pulse Transmitter/Pulse Divider is externally
supplied by 24 VAC or 230 VAC.

Pulse Transmitter and Pulse Divider are available with galvanically separated output module. See paragraph

below.

Galvanic separation is used in the following situations:

1)

If a cable length of more than 10 m is required between MULTICAL® and ULTRAFLOW®

2)

For flow sensor no. 2 in connection with MULTICAL®. If two flow sensors are used together with MULTICAL®,
one must be galvanically separated.

For further information, see paragraph

7.8.3 Calculator with two flow

3)

If ULTRAFLOW® is connected to other equipment/foreign calculators.

Note: Due to the galvanic separation, flow-info is not available if Pulse Transmitter or Pulse Divider is used.

When mounting the Pulse Transmitter or Pulse Divider between ULTRAFLOW® and MULTICAL®, the cable length can be
extended up to 100 m depending on the calculator. See paragraph

and

for more information.

In the case where galvanic separation is not necessary and flow-info is required, the Cable Extender Box enables an
extension of the cable length between ULTRAFLOW® and MULTICAL® up to max 30 m. For more information see
paragraph

4.4.2

Type number composition of Pulse Transmitter and Pulse Divider

Pulse Transmitter 66 99 903 -
Pulse Divider 66 99 907 -

Y

Z - XXX

Udgangsmodul

Forsyningsmodul

Slutsamling og mærkning

4.4.3

Output module and supply module

Y Output module

Corresponding supply module

2 Galvanically separated module

0, 7, 8

3 Galvanically separated module, low power

0, 2, 7, 8

Z Supply module

Corresponding output module

0 No supply

2, 3

2 Battery, D-cell

3

7 230 VAC supply module

2, 3

8 24 VAC supply module

2, 3

Table 9. Output module (Y) and supply module (Z) for Pulse Transmitter and Pulse Divider.

«
...
12
13
14
15
16
...
»

Содержание ULTRAFLOW 34 DN15-125























































































Отзывы:

Нет отзывов

Похожие инструкции для ULTRAFLOW 34 DN15-125

Бренд: Idexx Страницы: 6

Бренд: IDEAL INDUSTRIES Страницы: 10

Бренд: M-system Страницы: 5

Бренд: Unico Страницы: 96

Бренд: Saimo Страницы: 101

Бренд: PAT Страницы: 57

Бренд: Avery Weigh-Tronix Страницы: 54

IMI Sensors Spindler 607A61

Бренд: PCB Piezotronics Страницы: 24

Бренд: ACL Staticide Страницы: 5

Бренд: Omicron Страницы: 76

Бренд: Galileo Страницы: 30

Trimble Ranger 3

Бренд: Badger Meter Страницы: 20

Бренд: A&D Страницы: 38

Fusion-L 6 digit

Бренд: London Electronics Страницы: 44

Бренд: Westfalia Страницы: 18

Бренд: J-TECH Страницы: 3

Бренд: SV Страницы: 88

Бренд: Quadelectra Audioworx Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды