MULTICAL® 801
Kamstrup A/S · Technical Description · 5512-571_R1_GB _11.2016
115
14.4
LogView HCW
14.4.1
Introduction and installation
Regarding ”Introduction”, ”Interface” and ”Installation” see paragraph
14.1 Introduction METERTOOL HCW
since
it is similar for LogView HCW.
14.4.2
General information
”LogView HCW”
(6699-725) is used for read-out of logging data from MULTICAL
801 calculator and modules (e.g.
”Prog. data RTC + 4…20 mA pulse inputs” (67-00-22)) as well as for carrying out interval logging.
The read out data can be used for analysis and diagnostic test of the heating installation. Data can be presented
as table or graphics. Tables can be exported to ”Windows Office Excel”.
For available logging data see paragraph
6.12 Data loggers.
14.4.3
”Log”
Select the required data function.
Data Logger
”Internal KMP-Logger” makes it possible to read
data from the ”Programmable KMP-Logger”, which saves data
in the calculator.
Interval Log
allows interval reading of current MULTICAL
801
counts at optional intervals between 1 and 1440 minutes as
well as an optional number of repetitions of the reading
between 1 and 9999 times.
For read-out of ”current” counts, enter interval: 1 and
repetition: 1. Thereby you obtain one ”instantaneous” reading.
Daily Log, Monthly Log and Yearly Log
allow read-out of data logged by MULTICAL
801 at optional data period and
parameters.
Info Log
allows read-out of the latest 50 info events from MULTICAL
801, reading includes date and info code of
the info event.
14.4.4
KMP Logger (”Module 1”, ”Module 2” or ”External Module”)
Is used for read-out of logging data collected in the KMP logger module.
Reading is carried out by direct connection to the module. Module logger data cannot be read via the MULTICAL
801 calculator.
14.4.5
Help button
Contact
The contact button gives you the links to Kamstrup’s website and mailbox.
Output
This function shows the latest functions used in the program.
User manual
Link to the user manual for the meter on Kamstrup’s website.
14.4.6
About button
Lists the LogViews program version and revision numbers as
well as all sub-programs, their type numbers and revision
numbers for the entire LogView HCW program.
