17
Kamstrup A/S • 55121068_B3_GB_03.2015
MULTICAL® 62 • Water meter
9 Setup via front keys
Date, time and primary M-Bus address can be adjusted by means of the keys on the calculator’s
front.
1
In the display you select the reading you want to change
2
Lift off the calculator top
3
Wait until the meter has shut down (up to 2.5 minutes). Do not press any keys
4
While remounting the calculator top, keep the main key activated
until there are no more
lines in the display.
5
The setup menu is now active.
Having activated the setup menu the reading you want to change is displayed with the rightmost
digit lashing:
The value of the lashing digit can be changed by pressing the sub-key
. The digit is increased
by one each time the key is pressed, and passing 9 you start from 0:
Pressing the main key
you go to the next digit from right to left:
The active digit lashes and this digit can now be changed by pressing the sub-key
. You go to
the irst digit on the right by means of the main key
.
When the value of the reading has been changed you quit by pressing the main key
continu-
ously for approx. 10 seconds.
It should be checked whether the value is valid for the reading in question. If so, the value is saved
and an “OK” symbol is displayed. If not, the old value is maintained, no “OK” symbol appears, and
the display reverts to legal reading.