Kamstrup MULTICAL 62 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 20

Kamstrup MULTICAL 62 Скачать руководство пользователя страница 13

13

Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

6 Retroitting modules

Both top modules and base modules for MULTICAL® 62 can be supplied separately for retroitting.
The modules are conigured and ready for installation from the factory. Some of the modules
require individual coniguration after installation, which is possible by means of METERTOOL.

Top module

Possible coniguration after installation

Data hourly data logger

5

Clock adjustment.

RTC + M-Bus

7

Clock adjustment.
Primary and secondary M-Bus addresses can be
changed via METERTOOL or M-Bus. Furthermore,
monthly logger data can be selected instead of yearly
logger data via M-bus.

RTC + pulse output for CV + prog. data logger

B

Clock adjustment.
Coniguration of pulse outputs.

2 pulse outputs for CE and CV

C

Connection and pulse value are changed via
METERTOOL.

Base module

Data + pulse inputs

10

Pulse values of VA and VB are changed via
METERTOOL.

M-Bus + pulse inputs

20

Pulse values of VA and VB are changed via
METERTOOL.
Primary and secondary M-Bus addresses can be
changed via METERTOOL or M-Bus. Furthermore,
monthly logger data can be selected instead of yearly
logger data via M-bus.

Radio pulse inputs

21

Pulse values of VA and VB are changed via
METERTOOL.

Prog. data RTC + 4…20 mA
pulse inputs

22

Clock adjustment.
Pulse values of VA and VB are changed via
METERTOOL.

0/4…20 mA outputs

23

Conig data must be programmed into the calcu-
lator by means of METERTOOL when retroitting.
Furthermore, all parameters can be changed via
METERTOOL.

LonWorks, pulse inputs

24

Pulse values of VA and VB are changed via
METERTOOL. All other conigurations are made via
LonWorks.

Radio + pulse inputs (integral antenna)

25

Pulse values of VA and VB are changed via
METERTOOL.

Radio + pulse inputs (connection for external
antenna)

26

Pulse values of VA and VB are changed via
METERTOOL.

«
...
11
12
13
14
15
...
»

Содержание MULTICAL 62





















Отзывы:

Нет отзывов