Kampmann Venkon XL, Руководство пользователя

Страница: 38 / 72

Venkon XL
Assembly, installation and operating instructions
38
7 Electrical connection
IMPORTANT NOTE!
Condensation formation in the cooling unit!
In the event of on-site valve control, the cooling valve must be closed when the fans are switched off.
7.1 Maximum electrical rating values
Venkon XL, KaControl model (*C1)
Size Number of
fans Nominal
voltage [V AC] Mains fre-
quency [Hz] Nominal
power [W] Nom-
inal
current
[A] Leakage
current
[mA] Ri ana-
logue in-
put [KΩ] IP class Protection
class
1 1x single 230 50 172 1.5 1.29 20 IP21 I
2 1x tandem 230 50 244 2.0 1.29 20 IP21 I
3
1x single, 1x
tandem
230 50 423 3.3 2.58 20 IP21 I
4 2x tandem 230 50 498 3.9 2.58 20 IP21 I
Tab. 8: Maximum electrical rating values for Venkon XL, KaControl (*C1)
Venkon XL, electromechanical model (*00/*01)
Size Number of
fans Nominal
voltage [V AC] Mains fre-
quency [Hz] Nominal
power [W] Nom-
inal
current
[A] Leakage
current
[mA] Ri ana-
logue in-
put [KΩ] IP class Protection
class
1 1x single 230 50 172 1.5 1.29 100 IP21 I
2 1x tandem 230 50 244 2.0 1.29 100 IP21 I
3
1x single, 1x
tandem
230 50 423 3.3 2.58 50 IP21 I
4 2x tandem 230 50 498 3.9 2.58 50 IP21 I
Tab. 9: Maximum electrical rating values for Venkon XL EC, electromechanical model (*00/*01)
7.2 Electromechanical control, Venkon XL
7.2.1 Connection (*00 or 00D), Venkon XL
Fig. 17: Remove junction box from the Velcro
strip
The junction box for electromechanical control can be electrically installed separ-
ately from the side panel of the basic unit by Velcro fitting. Simply remove the
plastic lid to open the junction box.