Kampmann Katherm HK Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 84

background image

Katherm HK

Assembly, installation and operating instructions

6

2

Safety

This section provides an overview of all important safety aspects to ensure optimum protection of personnel as well as safe
and trouble-free operation. In addition to the safety instructions in these operating instructions, the valid safety, accident pre-
vention and environmental protection regulations must be observed for the area of use of the unit. It is the duty of the oper-
ator to ensure that instructions relating to maintenance (e.g. relating to hygiene) are complied with.

This section provides an overview of all important safety aspects for protecting personnel. In addition to the safety notes in
this and the more detailed instruction in accordance with the QR Code, the occupational health and safety and environmental
protection regulations applicable to the unit's field of application, as well as the notes in accordance with EN60335-1, must
be observed.

2.1

Correct use

The units are used for heating and/or cooling all areas of buildings that need to be heated in winter and cooled in summer
due to the high incidence of sunlight through the glass façades. Within the room, the unit needs to be connected to the build-
ing's heating/cooling/ventilation system and to the building's waste water and power network. The operating limits and lim-
its of use described in

must be observed.

Intended use of the unit also includes adherence to these instructions.

Information in accordance with EN60335-1

This unit can be used by children aged 8 years or more and also by people with reduced physical, sensory or mental cap-
abilities or a lack of experience and knowledge, if they are supervised or have been instructed in the safe use of the unit
and the resulting dangers. Do not allow children to play with the unit. Do not allow children to clean and maintain the
unit without supervision.
This unit is not intended for permanent connection to the drinking water supply system.
This unit is intended for being accessible to the general public.

Any use beyond or other than the stated intended use is considered as misuse.

Any change to the unit or use of non-original spare parts will cause the expiry of the warranty and the manufacturer’s liabil-
ity.

«
...
4
5
6
7
8
...
»

Содержание Katherm HK





















































































Отзывы:

Нет отзывов

Похожие инструкции для Katherm HK

CAN Repeater I-7531

Бренд: ICP Страницы: 4

Бренд: S&P Страницы: 18

CLIMAGUARD TX23

Бренд: McLean Страницы: 20

New XR Designer

Бренд: Haverland Страницы: 8

RADSON MIED0508EL

Бренд: Purmo Страницы: 32

Бренд: nedis Страницы: 36

Бренд: Glowworm Страницы: 56

Бренд: Singer Страницы: 36

Бренд: Paloma Страницы: 24

Бренд: pyromaster Страницы: 16

Бренд: HELLER Страницы: 6

Бренд: Olimpia splendid Страницы: 16

Бренд: MyAmplifiers Страницы: 3

WEXT5-SRCOOL12K

Бренд: Tripp Lite Страницы: 2

Бренд: Frico Страницы: 14

Бренд: Bryant Страницы: 6

Бренд: Dru Страницы: 32

Бренд: Wacker Neuson Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды