9
To Detach the Stainless Steel
Blending Shaft
1.
Once processing is complete,
switch OFF the motor by releasing
the ‘ON’ or ‘TURBO’ speed
button, switch off at the power
outlet and remove the power
plug from the outlet.
2.
Holding the motor body with one
hand whilst holding the upper
plastic part of the blending shaft
with the other hand, press the
‘Release’ buttons found at the
drive end of the motor to eject
the blending shaft from the
motor body.
Recommendations when
Using the Stick Mixer as a
Hand Blender
• The Stick Mixer blends foods and
liquids rapidly, therefore it is easy
to over-process. Remember when
using the blending shaft to stop the
Stick Mixer and check foodstuffs
throughout the operation.
• The stainless steel blending shaft
on the Stick Mixer allows for hot
food to be processed directly
in the saucepan. This makes
blending soups and sauces very
easy. For safety reasons, move
the saucepan away from the
heat before processing.
• Ensure the body of the Stick Mixer
and power cord are kept away
from any heat source.
• When pureeing and blending,
cut food into uniform sizes. This
will ensure smooth and consistent
results.
• Warm all liquids to be added to
soups and purees, this will ensure
even blending.
• To reduce spills, do not exceed
the maximum (MAX) level
specified on the blending jug.
• Place the jug on a level surface
during blending. This will keep
the jug stable.
• DO NOT process hard foodstuffs
such as coffee, cereals or
chocolate in lumps as these may
result in damage to the blades.
Dislodging Food From The
Blending Blade
If foodstuffs become lodged around
the processing blade or in the blade
guard, follow the safety instructions
outlined below:
1.
Release the ‘ON’ or ‘TURBO’ speed
button, switch the power off at
the power outlet and unplug the
power plug from the outlet.
2.
Use a spatula to carefully dislodge
the food. DO NOT use fingers as
the blades are sharp.
3.
After the food has been removed
and blades are clear, plug the
Stick Mixer back into the power
supply, switch the power on and
continue blending.
