15
6.
At first fuse the damaged plastic-part.
8.
PLASTIC REPAIR
Use the PLASTOFUSE only for intended purposes. Use this tool only for thermoplasts.
1.
Clean the area with the supplied grinder
before.
2.
Chose the matching Melting-Strips.
3.
Place the Melting-Strip ca. 1 cm before
the damage.
4.
Heat the Melting-Strip and the
damaged body-part, to fuse the plastic
components. Meanwhile you have
to apply light presure with the
Melting-Strip to the body-part.
5.
Place the blower nozzle in an angle
towards the surface.
ca. 1cm
HINT: Place the Melting-Strip ver-
tically into the surface with some
pressure. Do not lay down the strip
and try to press it vertically down.
Ca. 45°
Für optimal repair-quality we recommend following
temperatures:
7.
Get a small roll of material in front of the
strip.
Recommend temperature
°C / °F
PP-EPDM
255-280 / 491-536
PP
260-285 / 500-545
ABS
275-310 / 527-590
PA
280-320 / 536-608
