Kalor Cloe 17B, Руководство пользователя

Страница: 85 / 142

129
EN
Maintenance and cleaning
◊ by the user /
•
by the authorised qualified technical assistance
All cleaning of all parts must be carried out with the Hydro Insert completely cold
and unplugged to avoid burns and thermal shock. The Hydro Insert does not need
much maintenance if used with certified quality pellet. The need for maintenance
varies depending on the conditions of use (switching on and off repeatedly) and
depending on the performance required. It is recommended periodic monitoring
of the Hydro Insert to check its condition.
Parts Everyday
Every 2-3
days
Every
week
Every 15
days
Every 30
days
Every 60-
90 days
Every 1
year
Brazier ◊
Cleaning the ash collection
compartment with suction device
◊
Cleaning ash tray ◊
Cleaning the interior heat exchanger /
smoke fan compartment
•
Cleaning complete exchanger •
Clean "T" to exhaust
•
Flue •
Door gasket ash •
Internal parts
•
Flue pipe •
Circulation pump •
Hydraulic components
•
Electromechanical components •
The Hydro Insert requires a simple and thorough cleaning
in order to ensure a more efficient performance and
smooth operation. While cleaning the inside of the Hydro
Insert, to prevent the escape of ashes, you can start the
fan flue exhaust. Clean the grate from the ash and any
incrustation which could obstruct the passage of air. In the
case of depletion of pellets in the tank may accumulate
unburned pellets in the burn pot.
Always empty the residuals from the grate before each
start. Remember that only a brazier located and clean
properly can ensure ignition and optimal operation of
your Hydro Insert. When positioning the crucible, carefully
check that the ends of the pads completely adhere to
their home and that the hole with pipe dedicated to the
passage of the resistance. There should be no residual
combustion in the contact zone between the edges of the
crucible and the support surface on the door crucible.
BY THE USER
Daily control