Kalor Cloe 17B, Руководство пользователя

Страница: 70 / 142

114
Scheme 03:
the Hydro insert is connected to a domestic hot w
ater tank and to the heating circuit.
The Hydro insert is switched off when the probe is satisfi
ed.
The Hydro insert is switched on when the probe detects a lower temper
ature
to SET
ACS - ∆T (∆T settable by technical par
ameters).
a)
To set the w
ater temper
ature in the Hydro insert press the
. k
ey
. Increase or decrease the degrees with the k
eys
and
.
b)
To set the desired temper
ature in the room (using the probe on the board) press the k
ey
.
Increase or decrease degrees with the
and
k
eys
c)
To set the work power
, press the
k
ey and adjust it with the
and
k
eys
d)
To adjust the working power
, the desired temper
ature inside the DHW tank,
press the button
. Increase or decrease the desired degrees with the
and
.
The rinsing from the stand-by state occurs automatically when a heat increase is required to return to satisfy the chosen stand-by condition (when this is set to ON) or when there is a risk of hot w
ater inside the puffer
.
I
=
Valve motorization
(
4 - 5 - 6
)
II
=
External thermostat O
N
/ OFF
or
stand-by type 3 (optional) (
1
)
III =
NTC10K probe on
ACS tank
(
2
)
II
I
III
The scheme is indicative and w
ants to demonstr
ate only the components that can be managed by the Hydro insert.
Any relay pumps must be controlled separ
ately from the Hydro insert.
EN