Kalor Cloe 17B, Руководство пользователя

Страница: 58 / 142

102
EN
Remote Control
The remote control (Fig. 3) used to adjust water temperature
power and the on/off functions for the pellet Hydro Insert.
To start the Hydro Insert, press key and the Hydro Insert
will automatically enter the starting phase.
Press keys
+
(1) and
-
(2) to adjust temperature, and
use keys
+
(6) and
-
(5) to adjust operating power.
To turn off the Hydro Insert, hold down key .
To replace the 3 volt battery located on the back of the
remote control, pull the centre of the cover and the lever
on the side of the same, replace the battery observing the
correct polarity (Fig. 4)
Fig. 3 Fig. 4
It is mandatory to have an opening in the brick /
plasterboard coating to guarantee an adequate supply
of air to the chimney (see page 8).
It is recommended to replicate the same opening
made on the perimeter wall. Alternatively, the suction
pipe (Ø 50 mm) can be connected to the outside of the
home. If the suction tube is taken only outside of the
brick cladding, it is mandatory to have an air intake on
the perimeter wall of the house.
Remember that it is forbidden to
inhale the combustion air from
bedrooms, bathrooms, garages or
deposits that could have explosive
atmospheres.