INSTALLATION INSTRUCTIONS
Kallista Deep Soak Bath Cable Drain
1117994_2_A
Page 6 of 6
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
COmPLeTe THe INSTALLATION
Overflow Outlet
Handle
Setscrew
Plug
Drain
Outlet
Secure the Connections and Fittings
Wrench tighten all connections and fittings to one quarter turn past
hand-tight.
If using soldered connections, solder all joints at the tee.
Install the P21582 Trim Kit
Insert the plug into the drain outlet. Adjust the height of the plug, if
desired.
NOTe:
To ensure the setscrew does not inadvertently fall down the drain
outlet, push down on the plug to close the drain hole.
Secure the handle to the overflow outlet with the setscrew.
Turn the handle counterclockwise and clockwise to ensure proper
operation of the plug.
Complete the Bath Installation
Install the bath faucet according to the bath faucet manufacturer’s
installation guide.
Refer to the bath manufacturer’s installation guide to complete the
finished deck or wall around the bath.
