KAL-FIRE ECO-prestige 105-59, Руководство по установке

Страница: 80 / 184

80
37. Maintenance
37.1 Annual maintenance
Your appliance should be inspected once a year by a certified installation professional in order to guarantee optimal, lasting and safe
operation. Any fault should be immediately serviced. Ask your installer about the possibility of a maintenance contract.
37.2 Maintenance instructions
The maintenance instructions can be downloaded using the QR code located next to the product identification plate. The
instructions give details regarding annual maintenance and the installation of the fireplace furnishings. These maintenance
instructions can also be downloaded from www.kal-fire.info
37.3 Pre- and post-winter maintenance
After a certain period of use, deposits can appear on the side of the glass facing the fire. These deposits can be removed with a
moist cloth or a non-abrasive detergent (e.g. a cleaning product for ceramic glass). Do not use corrosive or abrasive products to
clean any part of the fire. Damage to the paint is not covered by the warranty. Minor deterioration can be touched up with a special
Kal-fire heat-resistant paint that is available from Kal-fire.
37.4 Removing the glass
Step 1: Slide the metal frame at the top of the fire upwards. (This does not apply to corner or 3-sided models.)
Step 2:
Release the handles that are now visible. (In the case of a corner or 3-sided model, the
handles are located under the mantle, and should be pulled gently upwards and outwards.)
Step 3:
Push in the metal protective strip at the left and right sides. (With a corner model, just
push in the protective strip for the large glass panel. With a 3-sided model, skip this step.)
Step 4:
The glass is now released. Take hold of it with both hands using the handles attached to
the glass panel. Lift the glass slightly to remove it from the groove and move the whole panel
slightly to the left or right. Then turn one side of the glass towards the exterior to remove it
carefully and completely from the fire. (In a 3-sided model, the glass falls slightly forwards and can
be taken straight out of the groove.)
37.5 Replacing the glass
To replace the glass, follow the instructions from step 4 in reverse order. Pull the handles downwards following the instructions in
step 2. The metal protective strips (step 3) automatically push out into place. Slide the metal frame downwards to hold in the glass,
as described in step 1 (does not apply to corner or 3-sided models).