KAL-FIRE ECO-prestige 105-59, Руководство по установке

Страница: 70 / 184

70
32. Preparing for use
The decorative elements (filling) should be positioned by the installer in compliance with the manufacturer’s instructions.
The position and quantity of these furnishings must not be modified as this could result in a hazardous situation.
32.1 Placing the decorative elements: Fairo ECO-prestige 75, 80 corner and 85 3-sided
Neither the ceramic logs nor the lava stones, black chips, glass stones or Kal-glow should be placed on top of the ignition or
ionisation pins. Incorrect placement could result in a hazardous situation or ignition problems or could generate an error
code.
Place the decorative elements delivered with the Fairo ECO-prestige as follows:
(see photos in Annex A, pages 87 - 91)
1.
Place the ceramic coal as in photo 1, annex A.
2. Place the glass stones around the ceramic logs, as in photo 2, annex A.
3. Place log C as in photo 3, annex A. Ensure that the holes at the back of the log are fitted to the pins on the burner plate.
4. Next, place the lava stones on the burner as in photo 4, annex A.
CAREFUL!
The sack of lava stones contains gravel. Ensure that the gravel does not touch the burner. Also ensure that the ignition and
ionisation rods are left uncovered (to avoid malfunction).
5. Place the chips at the outer edge as in photo 5, annex A.
6. Place the ceramic log D as in photo 6, annex A.
7. Place the ceramic log E as in photo 7, annex A.
8. Scatter the cryptonite supplied on the chips and the glass stones - photo 8.
9. Continue to place the logs as in photos 9 to 11, annex A.
10. Scatter the ashes supplied on the glass stones and lava stones - photo 12 and 13, annex A.
The quantity of ashes can be adapted according to preference.
Hairline cracks can appear on the ceramic logs when the fire is used. These have no harmful effects on the play of flames of
the fire.
32.2 Placing the decorative elements: Fairo ECO-prestige 105/59, 110/55 corner and 115/55 3-sided
Neither the ceramic logs nor the lava stones, black chips, glass stones or Kal-glow should be placed on top of the ignition or
ionisation pins. Incorrect placement could result in a hazardous situation or ignition problems or could generate an error
code.
Place the decorative elements delivered with the Fairo ECO-prestige as follows:
(see photos in Annex B, pages 92 - 96)
1.
Place the ceramic coal A and B as in photo 1, annex B.
2. Place log C as in photo 2, annex B. Ensure that the holes at the back of the log are fitted to the pins on the burner plate.
3. Next, place the lava stones on the burner as in photo 3, annex B.
CAREFUL! The sack of lava stones contains gravel. Ensure that the gravel does not touch the burner. Also ensure that the
ignition and ionisation rods are left uncovered (to avoid malfunction).
4. Place the glass stones around the ceramic logs as in photo 4, annex B.
5. Place the chips at the outer edge as in photo 5, annex B.
6. Continue to place the logs as in photos 6 to 13, annex B.
7. Scatter the cryptonite supplied on the chips and the glass stones - photo 14.
8. Scatter the ashes supplied on the glass stones and lava stones - photo 15, annex B.
The quantity of ashes can be adapted according to preference.