KAL-FIRE ECO-prestige 105-59, Руководство по установке

Страница: 151 / 184

47
11.1
Fairo ECO-prestige: three safety measures
1. An electronic flame ionisation detector detects the presence of flames.
If the Fairo ECO-prestige does not detect a flame, the delivery of gas is cut off for 1
minute. Following that, the fire will attempt to reignite automatically. If the fire must be
switched off immediately and should not be relit, hold down the / button on the remote
control for around 10 seconds. This ‘emergency stop’ definitively cancels the heat-
controlling device, pre-empting automatic reignition.
2. 24-hour safety
After 3 consecutive automatic ignition attempts without any flame being detected, the
system will be blocked (code A08 ). In this case, it is possible to use the remote control to
try to unblock the fire a further 2 times (see section 15.2) before the system is locked for
24 hours (lock-out code F08 ). If this occurs, the Fairo ECO-prestige cannot be used for 24
hours, a feature designed to ensure user safety.