Full digital mechanical sector scanning ultrasonic diagnostic instruments (Vet) User’s Manual V1.03
- 13 -
Lithotripsy positioning line: In real-time B mode, press
key to enter main-menu and press direction
keys
to move cursor to “Puncture” and then press direction keys
to choose line 3, press
key
to confirm, lithotripsy positioning line appears on the screen; at the same time, the measurement depth of
lithotripsy positioning line “+: 0.0mm” is shown at the top right corner, press direction keys
to move
the mark “+” to positioning the depth. Press
key to quit.
6.7 Body Mark and Probe Mark
This product contains 27 body marks that are divided into two pages when display. The operation steps
are as follows:
1.
Freeze the image, press direction keys
to move cursor to “BodyMark”, press
key, body marks
will be showed in the image area, press direction keys to change pages;
2.
Press direction keys to move to the position of desired body mark, press
key to confirm the
selected body mark;
3.
Press direction keys to change the probe mark position; press
key to change probe mark direction;
4.
Press
key to quit body mark and probe mark status;
5.
Press
key to quit froze and body mark status.
6.8 Text Input
Operation steps:
1.
Freeze the image;
2.
Press
key, the cursor is located behind ID;
3.
Press
key again, at the same time characters input menu will be shown at the bottom of the
screen:
Caps 0 1 2 3 4 A B C D E F G H I J K L M
Shift 5 6 7 8 9 N O P Q R S T U V W X Y Z
Press direction keys to move cursor to point to Caps, and then press
key to achieve
capital and
small letter conversion; If the cursor point to Shift, press
key to achieve the conversion between
the letter and punctuation;
4.
Press direction keys to choose “numbers” or “characters” and press
key to confirm;
5.
After inputting ID, press
key, the screen below shows “Pregnancy, Unpregnancy, Suspected,
Disease” four kinds of results; at the same time the date and time of inspection automatically
shown behind the result;
6.
Press direction keys
to select the result, press
key to confirm and exit;
7.
Press
key, the cursor is located behind ID, press direction keys to move cursor to image area
and press
key again to input according to Step 4;
8.
If need modify the content, continuously press
key twice to quit annotation status, press
direction keys
to select “Clear”, at last press
key to clear all noted marks and retype;
9.
Press
key to quit.
6.9 Image storage and recall
6.9.1 Save image
Storage to main unit
1. Freeze the image;
2. Press
key, a “Save” prompt appears on lower right corner of the screen;
3. Press direction keys
to select the current image code, such as choose “003”;
4. Press
key, the current image is saved in the frame for coded “003”. The saved image code is
