Full digital mechanical sector scanning ultrasonic diagnostic instruments (Vet) User’s Manual V1.03
- 5 -
As shown in fig, insert the support bracket from the back of the instrument, place the instrument on a
desktop; adjust the angle of the support bracket to adjust the screen visual angle.
2. Instrument fixed in the arm to use
a. Lock the arm-band as figures from the back of the instrument;
b. Extend your arm into the arm-band according to arrow direction, or disconnect the arm-band to
put on your arm, the long end through the back ring.
c. Strain the arm-band and stick it firmly on the Velcro.
3. Instrument hanging on the chest to use
4. Instrument places on the leather lag and hangs on the chest to use
a. Take out the attached straps; install the
straps on the rings of main unit as fig
shown;
b. Adjust the strap length, the front strap hung
on the neck, the back strap fixed on the
waist, two straps can also adjust to similar
length to meet the requirements of the
screen visual angle, while hanging around
the neck to use.
Installation:
a.
Take out the instrument and accessory, install the probe;
b.
The probe passes through the oval hole of the leather bag, and
put the instrument into the leather lag;
c.
Install the straps on the rings of leather bag as fig shown;
d.
Adjust the strap length, the one hung on the neck, the other
one fixed on the waist, you can also use a strap around your
neck or diagonal used in your shoulder.
The benefits of using this method:
a.
Self-built darkroom for the strong-light environments.
b.
The protection of leather bag can avoid collisions and
pollution in the use process.
Attention:
when
using the arm-band, if allergy, please consult a doctor immediately and
increase protective measures (e.g. Wear gloves before use).
