38
EN
ON/OFF button
1
Press this button can turn on or turn off the air conditioner.
MODE button
2
+/- button
3
FAN button
4
Press this button and the mode will circulate according to belo
w sequence: AUTO→
COOL→DRY→FAN→HEAT (This function is only applicable for heat pump unit).
After you selecting mode, corresponding will be bright.
to ex-factory setting. Set temperature can’t be adjusted and displayed. Press
“FAN” button to adjust fan speed.
Note:
● After putting through the power, the air conditioner will gi
ve out a sound. After
that, you can operate the air condition by remote controller.
● Under ON status, after each pressing of the button on remote controller, sign-
al-sending icon on display screen of re
mote controller “ ” will flash once. If the
air conditioner gives out a sound, it indi
cates the signal has been send to air
conditioner.
● Under OFF status, display screen of remote controller displays set temperature.
● After selecting AUTO mode, air conditioner will operate automatically according
Press “+” or “-” button can adjust set temperature. Press “FAN” button to adjust
fan speed.
● After selecting COOL mode, air conditioner will operate under cooling mode.
speed. Fan speed can’t be adjusted.
● After selecting DRY mode, air condition
e
r will operate under drying mode at low
adjust fan speed.
● After selecting fan mode, air conditioner only blow fan. Press “FAN” button to
controller, press ON/OFF button can’t turn on the air condition
er.
● Cooling only unit can’t receive heating
m
ode signal. If set HEAT mode by remote
1ºC
(
ºF
). When holding “+” or “-” button, 2s later, set temperature wi
ll change
quickly. Loose the button on remote controller after setting temperature. (tempe-
rature can’t be adjusted under auto mo
d
e)
● After each pressing “+” or “-” button, set temperature will i
ncrease or decrease
time. (refer to TIMER button for detailed setting)
Press this button to select fan speed in sequence: auto (AUTO), first notch ( ),
second notch ( ), third notch ( ), f
o
urth notch ( )
(this function is not available for this air conditioner. Fourth notch is same as third
notch).
● Under TIMER ON, TIMER OFF or clock setting, press “+” or “-” button to adjust
Under ON status, display screen displays corresponding function icon of the air
conditioner.
AUTO
COOL
DRY
FAN
HEAT
Operation introduction of remote controller
Operation introduction of remote controller
Swing button (not applicable for this model)
5
Press this button to turn on up&down swing.
SLEEP button
6
TIMER button
7
Under COOL, HEAT or HEAT mode, press this button to turn on sleep function.
Press this button again to cancel sleep function. This function is not available for
FAN mode and AUTO mode.
display. Press “+” or “-” button to adjust TIMER OFF setting within 5s. After each
pressing of “+” or “-” button, timer setting will increase or decrease 0.5h. If hold
“+” or “-” button, time will change quickly after 2s, and loose the button until reach
● Under ON status, press this button to set TIMER OFF. “T-OFF” and “H” flash to
● Under AUTO fan speed, air conditioner will select proper fan speed according to
ex-factory setting.
● Fan speed can’t be adjusted under DRY mode.
to your required time. Press “TIMER” button to confirm it. “T-O
FF” and “H” won’t
flash any more.
OFF procedure for detailed operation.
Cancel TIMER ON/TIMER OFF: Under TIMER setting status, press TIMER
● Under OFF status, press this button to set TIMER ON. Please refer to TIMER
button once to display residual time. Press TIMER button again within 5s to
cancel TIMER.
AUTO
first notch (same as low speed on control panel)
second notch (same as medium speed on control panel)
third notch (same as high speed on control panel)
fourth notch
Note:
● Time setting range: 0.5-24h.
roller will exit setting status automatically.
● Time interval between two operations can’t exceed 5s. Otherwise, remote cont-
Note:
