49
EN
Preparation before installation
Note:
check if the accessories are available before installation.
Accessory list
Tools needed for installation
unit
joint A
joint B
joint C
heat discharge pipe
screw (3)
pipe clip
rubber plug
drainage pipe
battery (2)
user's manual
cross screwdriver
straight screwdriver
saw
gauge
scissors
pencil
(AAA 1.5V)
wire hook (2)
remote controller
Optional accessories
Optional accessories
:
some models are without the
following accessories.
support (2)
rain shield (1) protective grille (1)
screw (7)
nut (4)
bolt (4)
spring washer (4)
washer (4)
window frame (3)
window fastener
clip of rear connection
plate (4)
sponge A
sponge B (adhesive) (2)
Install wire hook
● Assemble the wire hook at the back of the unit with screws (the direction of wire hook is
● Wind the power cord around the wire hook.
as shown in following fig).
direction of wire hook is upward
wire hook
screw
direction of wire hook is downward