KAESER M43, Руководство по обслуживанию

Страница: 88 / 246

Bleeding the fuel system
The electric fuel pump is used to bleed the system. The negative battery terminal must be connec‐
ted for the pump to operate and bleeding to be carried out.
When the starter switch is turned to the "II" position, the pump starts and bleeds the fuel system.
The engine is not started!
Air can find its way into the fuel system under certain conditions or maintenance tasks:
■ Fuel tank empty.
■ Replacing the filter element/cartridge of:
─ Fuel pre-filter
─ Main fuel filter
■ Replacing the fuel pump
■ Work on the fuel lines
Fig. 26 Bleeding the fuel system
1
Fuel tank
2
Fuel pre-filter
3
Electric fuel pump
4
Upper part, main fuel filter
5
Filter cartridge, main fuel filter
6
Bleed screw, main fuel filter
7
Fuel return line
1. Reconnect the negative battery terminal.
2. Turn the starter switch to the "II" position.
The fuel system is bled.
Changing the fuel pre-filter element
The filter element should be changed according to the maintenance schedule.
Precondition The negative cable to the battery is disconnected!
1. Place the fuel receptacle under the pre-filter.
2. Loosen the hose clamp on the filter cap.
3. Pull off the fuel line.
4. Catch any fuel in the receptacle.
5. Remove the pre-filter cap.
6. Withdraw the filter element.
10 Maintenance
10.3 Engine
78
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
RAMIRENT