KAESER M43, Руководство по обслуживанию

Страница: 205 / 246

Additional loading
Do not exceed the permissible loading (overall weight, coupling load, axle load).
Observe national traffic laws. Any essential but excessive additional loads must be carried by the
towing vehicle.
1. Check that loading the machine with tools or accessories during transport is permissible.
2. Place additional loads only in the spaces provided and secure carefully.
Additional precautions for conditions of snow and ice
Considerable snow or ice may build up on the machine under low temperature conditions.
1. CAUTION!
There is danger of accidents caused by snow or ice falling off the machine.
Snow or ice falling from the towed machine can endanger following vehicles.
Problems with driving dynamics and damage to the machine could occur.
The maximum permissible axle load could be exceeded.
➤ Do not tow the machine if it is covered by snow or ice.
2. Remove any snow or ice before towing.
Observe / carry out the following before towing:
1. Make sure the towing hitch is compatible with the ball or eye coupling on the towed machine.
2. Check that the machine is shut down and secured against accidental restarting.
3. Detach all connecting lines and hoses.
4. Make sure there are no unsecured tools lying on or in the machine.
5. Close and lock the canopy.
Adjust the towbar to suit the height of the towing vehicle hitch.
When the machine is coupled up, the towbar must be parallel with the ground.
See chapter 6.3 for the height adjustment.
Fig. 45 Towing alignment
12 Decommissioning, Storage and Transport
12.2 Transporting
No.: 9_9432 02 E
Service Manual Screw Compressor
M43
195
RAMIRENT