manualshive.com logo in svg

KAESER M43, Руководство по обслуживанию

Поделиться
Скачать
KAESER M43 Скачать руководство пользователя страница 111

Checking the overrun damper

1. Loosen the transfer cable one side.
2. Press in the damper against its damping force.

Have the damper replaced by a specialist workshop if:
■ There is little resistance to pushing in,
■ Air has entered the device,
■ There is little resistance to pulling out the shock absorber.
■ Oil leaks out.

10.5.4  Greasing the brake rods

Grease the brake rods when necessary (stiff movement) but at least annually.

Material Lithium enriched multi-purpose grease

Non-corroding oil
Cleaning rags

Precondition The machine is shut down.

The machine is disconnected from the towing vehicle and safely parked.

➤ Greasing the brake rods

10.5.5  Checking brake linings

A visual check can be made through the inspection hole in the brake anchor plate.

Material Screwdriver

Torch

Precondition The machine is shut down.

The machine is disconnected from the towing vehicle and safely parked.

Fig. 40 Checking the brake lining thickness

1

Inspection hole

2

Brake linings

1. Remove the plug from the inspection hole.
2. With the aid of a torch, check the brake lining thickness.

Have the brake linings replaced by a specialist workshop if they are less than 2 mm thick.

3. Replace the plug in the inspection hole.

10 Maintenance

10.5 Chassis

No.: 9_9432 02 E

Service Manual    Screw Compressor  
M43  

101

RAMIRENT

Содержание M43























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды