manualshive.com logo in svg

KAESER M43, Руководство по обслуживанию

Поделиться
Скачать
KAESER M43 Скачать руководство пользователя страница 32

3.8  In Emergency

3.8.1  Correct fire fighting

Suitable extinguishing agents:
■ Foam
■ Carbon dioxide
■ Sand or earth

Unsuitable extinguishing agents:
■ Strong jet of water

1. Keep calm.
2. Give the alarm.
3. Shut down the machine from the instrument panel if possible.
4. Move to safety.

■ Warn persons in danger.
■ Help incapacitated persons.
■ close the doors.

5. Try to extinguish the fire if you have the skill to do so.

3.8.2  Contact with operating materials

The following operating materials are in the machine:
■ fuel
■ Engine coolant
■ battery electrolyte
■ lubricating oil
■ compressor cooling oil
■ Tool lubricant (option e)
■ Antifreeze (option ba)

If necessary, request a copy of the safety data sheet for KAESER SIGMA FLUID.

➤ Eye contact:

rinse thoroughly with lukewarm water and seek medical assistance.

➤ Skin contact:

wash off immediately.

3.9  Warranty

This service manual contains no independent warranty commitment. Our general terms and condi‐

tions of business apply with regard to warranty.
A condition of our warranty is that the machine is used for the purpose for which it is intended un‐

der the conditions specified.

Due to the multitude applications for which the machine is suitable the obligation lies with the user

to determine its suitability for his specific application.

3

Safety and Responsibility

3.8

In Emergency

22

Service Manual    Screw Compressor  
M43  

No.: 9_9432 02 E

RAMIRENT

Содержание M43























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды