Configuration and Operation
Page 33
Operating Instructions for Powador 7700-9600_EN
EN
Selecting menu level "3" (service technician)
↻
The inverter is operating.
↻
The LCD is showing the unit name.
"
Press key "2" for 15 seconds.
»
The LCD is showing the country-specific parameters.
"
Press key "1" repeatedly or press and hold.
»
The display runs through menu level "3".
"
To return to menu level "1", press keys "1" and "2" simultaneously or wait for one minute without
pressing a key.
Entering password or unlock code
"
Key "1" selection of items (1-4).
↻
The LCD shows the selected digits by underlining them.
"
Press key "2" to set the value. (0-9, A-F).
↻
The LCD shows the set digits or letters.
"
Press "1" to check password.
↻
If the password is correct, the unlocked menu option is displayed.
Saving changed settings
"
Press keys "1" and "2" simultaneously to save settings or wait one minute after setting.
»
The LCD jumps back to menu level "1".
8.2
Initial start-up
When started for the first time, the inverter displays the configuration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After configuration is completed, the configuration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected param-
eter menu.
NOTE
The sequence of the settings required for initial commissioning is preset in the configuration assis-
tant.
Initial configuration
↻
You are in the first start-up.
"
Select the menu language.
"
Select the country of operation with grid type.
"
Press key 1 and confirm with "Yes" that you want to permanently save the country set.
»
You have completed the initial configuration. The inverter begins to operate.
