Kaco blueplanet gridsave 110 TL3-S, Руководство пользователя

Страница: 35 / 93

9 Configuration and operation
9.1 Initial start-up
When started for the first time, the device displays the configuration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After configuration is completed, the configuration assistant does not appear again when the device is
restarted. You can then change the country setting only in the password-protected parameter menu. The other
settings can still be changed in the Settings menu.
NOTE
The DC power supply must be guaranteed during initial start-up.
6
The sequence of the settings required for initial start-up is preset in the configuration assistant.
Following successful authorisation and selection of the main menu option - Configuration , the installation wizard is
opened directly (if the device is still on the factory defaults and commissioning has not yet been carried out).
However, the installation wizard can also be re-opened at a later date to carry out changes to the original configuration.
There are currently different steps in the installation process and these are detailed below.
Step: Language selection
↻
The installation wizard has been started or re-started.
1. Select
Menu language
via the dropdown menu.
2. Confirm the action field.
ð Pressing the
Next
button will take you to the next installation step.
Fig. 36: Menu item: [See sec-
tion 9.4.2 } Page 42]
Step: Country configuration
↻ A language has been selected.
1. Select
Country
and
Grid type
from the dropdown menu.
2. Confirm the action field.
ð Pressing the
Next
button will take you to the next installation step.
Fig. 37: Menu item: [See sec-
tion 9.4.2
}
Page 42]
6
It is only possible to configure the grid parameters with DC voltage. The further parameters can also be config-
ured with a present AC voltage.
Manual Configuration and operation | 9
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
Page 35
EN-US