Kaco blueplanet 50.0 TL3 S, Руководство по эксплуатации

Страница: 50 / 68

Maintenance/Troubleshooting
Page 50 Operating instructions KACO blueplanet 50.0 TL3 S/Basic/M/XL
EN EN
Displaying the software version
"
Open the Information / SW version menu.
» The inverter will display the versions and checksums of the software that is currently loaded.
9 Maintenance/Troubleshooting
9.1 Visual inspection
Inspect the inverter and the cables for exterior visible damage and note the operating status display of the inverter. In
case of damage, notify your installer. Repairs may only be carried out by authorised electricians.
NOTE
There are components in the housing of the inverter which may only be repaired by our KACO
customer service team.
The inverter should be checked for proper operation by a qualified electrician at regular intervals
and if you experience problems, you should always contact our customer service team..
9.2 Cleaning the housing
DANGER
Lethal voltages in the inverter!
Serious injuries or death can result if moisture enters the system.
›
Only use completely dry objects to clean the inverter.
›
The inverter should only be cleaned from the outside.
Cleaning the inverter
"
Do not use compressed air!
"
Use a vacuum cleaner or a soft brush to remove dust from the fan cover and from the top of the inverter on a
regular basis.
"
Remove dust from the ventilation inlets if necessary.
9.3 Cleaning the heat sink
CAUTION
Risk of burns from hot surface.
Heat sinks become very hot when in operation!
›
Never touch the heat sinks after operation.
›
Allow the heat sinks at least 10 minutes to cool down before cleaning.