Kaco blueplanet 50.0 TL3 S, Руководство по эксплуатации

Страница: 16 / 68

Mounting
Page 16 Operating instructions KACO blueplanet 50.0 TL3 S/Basic/M/XL
EN EN
Authorised electrician
2. Mark the positions of the drill holes using the slots in the wall bracket. NOTE: The minimum clearances
between two inverters, or the inverter and the ceiling/floor have already been taken into account in the dia-
gram (Figure 12 on page 15).
3. Fix wall mount to the wall with the supplied mounting fixtures in the mounting kit. NOTE: Make sure that the
wall bracket is aligned correctly.
» Proceed with the installation of the unit.
CAUTION
Power reduction due to heat accumulation.
In the event of insufficient ventilation and the resulting heat build-up, the unit will go into power
regulation mode.
›
Observe minimum clearances and provide for sufficient heat dissipation.
›
All objects on the inverter housing must be removed during operation.
›
Ensure that foreign bodies do not get in (cable residue, cable ties) via the heat sink guard plate.
Otherwise cleaning must take place before initial operation.
6.3 Installing the unit
WARNING
Risk of injury from improper lifting and transport.
If the unit is lifted improperly, it can tilt and result in a fall.
›
Always lift the unit vertically using the openings provided.
›
Use a climbing aid for the chosen installation height.
›
Wear protective gloves and safety shoes when lifting and lowering the unit.
›
Do not attach the unit to the web of the upper side of the housing.
1
1
2
4
3
NO
4
5
Figure 13: Lift the unit using the opening Figure 14: Insertion aid in wall holder
Key
1 Opening 4 Marking for insertion into wall holder
2 Centre of gravity 5 Outer contour of wall holder
3 Warning sign (attachment prohibited)