Kaco blueplanet 50.0 TL3 S, Руководство по эксплуатации

Страница: 32 / 68

Configuration and Operation
Page 32 Operating instructions KACO blueplanet 50.0 TL3 S/Basic/M/XL
EN EN
8 Configuration and Operation
8.1 Controls
The inverter has a backlit LCD display as well as three status LEDs. The inverter is operated using 6 buttons.
1
2
3
4
5
6
7
Figure 42: Control panel
Key
1 “Operating” LED 5 4-way button
2 “Feed-in” LED 6 “Enter” key
3 “Fault” LED 7 “ESC” key
4 LCD
8.1.1 LED indicators
The 3 LEDs on the front of the inverter show the different operating states. The LEDs can display the following states:
LED illuminated LED flashing LED not illuminated
The LED indicators show the following operating status:
Operating status LEDs Display Description
Start The green “Operating” LED is illuminated
if an AC voltage is present,
(independently of the DC voltage).
Feed-in start Power fed into the grid
or measured values
The green “Operating” LED is lit.
The green "Feed-in" LED is illuminated
after the country-specific waiting period*.
The unit is ready to feed in, i.e. is on the
grid.
You can hear the grid relay switch on.
Feed-in operation Power fed into the grid
or measured values
The green “Operating” LED is lit.
The green “Feed-in” LED is lit.
The “Feed-in” icon appears on the LC
display.
The unit feeds into the grid.
* The waiting period ensures that all grid parameters are in the permissible ranges.