Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
49
5.18 Starting the taping process
After correctly inserting the cable set (see 5.17), the taping
process can be started.
Image serves as example only
Make sure that you are positioned outside the operating
range of the safety light barrier. If both start buttons are lit
green, this means the machine is on standby.
Press one of the two start buttons to start taping.
5.19 Ending the taping process
Once taping has finished, the two clamps open up allowing you to remove the taped item(s).
5.20 What to do in an emergency
In an emergency, press the emergency stop button.
The machine stops immediately and the protective
hood is unlocked.
After resolving the emergency stop situation, release
the emergency stop button.
The flashing of the signal lamp indicates that the
machine is ready for operation.
