Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
48
5.17 Inserting items to be taped
The insertion process varies according to the line receptacles used and cannot therefore
be described exactly. The insertion process described below is therefore an example only.
A detailed description of your line receptacle can be found in the appendix.
Before being able to insert items for taping, the machine
must be switched on (see 5.2) and the clamping device
positioned (see 5.15).
Guide the first line connector into the left-hand receptacle pocket. Push the line connector in the
receptacle up to the stop and clamp the connector. Make sure that you are within the operating
range of the safety light barrier when doing this.
Insert the lines in the right-hand receptacle and fix these in place. Now press the start button on
the right. The cable set is now tensioned axially with the tensile force set in the program. You also
need to be within the operating range of the safety light barriers when pressing the button on the
right.
The line can subsequently be relieved of tension, if necessary, by placing a hand inside the
operating range of a light barrier and pressing the respective start button.
