Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
41
5.14 Inserting adhesive tape
Switch off the machine via the Off switch.
Open the protective hood.
Attach the roll of adhesive tape to the take-up mandrel by
sliding it on laterally up to the stop. (If present, remove empty
tape roll beforehand.)
Pull off approx. 30 cm of the adhesive tape and guide it over
the Eladur roller of the electronic winding aid.
Make sure the sticky side of the tape faces upwards.
Flip up the hold-down device.
Pass the adhesive tape around the two guide rollers (with the
non-adhesive side facing down) and then insert it in the hold-
down device.