Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
39
5.12.11
Tensile force calibration
This program screen can be used to activate or
deactivate the tensile force calibration function
for the right-hand clamping device via the two
sliders.
Moreover, the white input field can be used to
adjust or correct the tensile forces.
Standard values:
50N => + 1.07
10N => + 0.35
For information on calibration process, see 5.16.
5.13 Service
Use the “Service” button in the main menu to bring up the service menu program screens (see
5.5). These program screens are password-protected and only intended for authorized personnel.
The “Home” button is used to return to the main menu.
Use the “<<” and “>>” buttons to switch between the individual menu pages.
5.13.1
W-axis
ACC: Drive-unit acceleration at W-axis
DEC: Drive-unit deceleration at W-axis
Ref. pos: Reference point displacement
(adjustment) at W-axis
