W W W . K A A R T A . C O M
1 7
Figure 18: Upper Support Arm rotated to down position.
2.
Using a 6mm hex allen key, loosen one (1) M8 x 16mm long socket head fastener
that secures a pivot joint to the top cross rail (it does not matter which arm is first).
Only loosen the M8 fastener enough so that the pivot joint is free to slide along the
top cross rail slot and the alignment tab in the pivot joint is clear of the rail slot
(Figure 19). Ensure that the pivot joint can freely rotate in the slot (approximately 1
full turn of the fastener). Slide the arm down the rail to the approximate location
shown in Figure 20. Arm must be clear of the adjacent pivot joint and be able to
rotate freely. Rotate the arm and pivot 90
o
so the entire assembly is stowed in-line
with top cross rail and the arm is resting on the Stencil Pro Mounting Plate as
shown in Figure 20.
Figure 19: Location of M8 pivot joint fastener.
TOP CROSS RAIL
PIVOT JOINT
M8 X 16MM LONG
SOCKET HEAD FASTENER