W W W . K A A R T A . C O M
1 5
2.
Slide each Base Reinforcement plate until the entire plate is in its stowed position
on the Front Side Rail at the approximate locations shown in Figure 15. Tighten all
sixteen (16) M6 button head fasteners so all four (4) reinforcement plates are
secure to the front side rail. Ensure all four (4) Reinforcement plates and mounting
hardware are clear of the rear Side Rails.
Figure 15: Vehicle Mount Base Assembly; Base Reinforcement Plates in stowed position.
3.
Fold the Vehicle Mount Base Assembly in half into its stowed position and set aside
for shipping/transport as shown in Figure 16.
Figure 16: Vehicle Mount Base Assembly in stowed position.
BASE REINFORCEMENT PLATE
(4X), IN STOWED POSITION
REAR SIDE RAILS
FRONT SIDE RAILS